home *** CD-ROM | disk | FTP | other *** search
/ BBS Toolkit / BBS Toolkit.iso / wildcat / wcht218.zip / WHATS.NEW < prev    next >
Text File  |  1993-04-29  |  6KB  |  172 lines

  1. Version 2.18  [4-29-93]
  2.  
  3.   Another general bug fix.  /INVITE, /UNINVITE, and /TOPIC commands
  4.   have been added.
  5.  
  6. Version 2.17  [2-17-93]
  7.  
  8.   Basically, I cleaned up v2.16.  I was reading the wrong byte from
  9.   NODEINFO.DAT, so the local keyboard is always off except on local
  10.   nodes.  I fixed the file sharing, and file locking.  File locking
  11.   should work now.  I re-structured my program internally even more.
  12.  
  13.   Note... I may have forgotten to document some changes, I forget
  14.   about many little bug fixes.
  15.  
  16.   o Added a few more help screens.
  17.   o The bad users list has been added.
  18.   o The /RECORD command for SysOps has been added.
  19.   o The rooms have been changed quite a bit.
  20.   o The message system has been fixed, there shouldn't be any more
  21.     dumping of the entire chat file, or "phantom" messages from old
  22.     chats appearing.
  23.   o The Language Filter has been improved slightly.
  24.   o The /PAGE command had a tiny little bug which I fixed.
  25.     (That is the under-statement of the year)
  26.   o The /TIME command was not subtracting the time a user has been
  27.     in the door from the user's total time limit, thus is would
  28.     display the same thing every time.
  29.   o Whispering can be accomplished with a partial user-ID if there
  30.     is only one user that matches the partial user-ID.
  31.   o The /MEM command has been expanded to display critical WildChat
  32.     system variables.  Also, it's a lot nicer looking.
  33.   o The /HAIL command has been added for SysOps.  It will send a
  34.     message to another node, and if the other node is awake, a
  35.     response will be sent back.  Very useful for testing if a node
  36.     is crashed, or if a user is asleep.
  37.  
  38. Version 2.16  [2-1-93]
  39.  
  40.   This was such a major update, most of these changes won't make
  41.   any sense unless you give the new release a try and see them
  42.   for yourself...
  43.  
  44.   o Small changes to internals and some data structures
  45.   o Fixed Time/Date Handling
  46.   o Changed /GIVETIME
  47.   o Fixed NO CARRIER and FORCED
  48.   o Removed WILDCHAT.RMS
  49.   o Changed a few colors/text
  50.   o Added more action commands
  51.   o Safe-guarded the DTR control so it won't run on local nodes
  52.   o Added the Gender Coloring
  53.   o Responds to Nodeinfo keyb flag
  54.   o Messages can be recieved while in the middle of typing a line.
  55.   o Removed "Echo" option from configuration
  56.   o Changed help system
  57.   o Added /n# whispering
  58.   o Added /IGNORE, /UNIGNORE
  59.   o REAL Error handling now implemented
  60.   o Added DesqView support
  61.   o Added /DESQVIEW
  62.   o Added SEMI-ROOMs
  63.   o Added /ROOM
  64.   o Added inter-room paging
  65.   o Added /BROADCAST
  66.   o Added SYSOPS.LST
  67.   o Added /ZAP, /DROP, /EVAC, /CLEAR, /HIDE, /DEBUG, /SNEAKOUT
  68.  
  69. Version 2.15  [1-8-93]
  70.  
  71.   o When running on a FOSSIL driver, an unlimited number of COM ports are
  72.     supported.
  73.  
  74. Version 2.14  [12-21-92]
  75.  
  76.   o I added support for FOSSIL drivers.
  77.   o If WCHOME doesn't exist, WildChat will try to read HOMEPATH.  I haven't
  78.     tested this.  I added this per request of one SysOp.  I don't know how
  79.     useful it is, but it's there anyway.
  80.  
  81. Version 2.13  [11-7-92]
  82.  
  83.   o I botched the last release and this is the fix.
  84.  
  85. Version 2.12  [11-5-92]
  86.  
  87.   o Changed the keyboard/modem input routines to filter out lower-ASCII
  88.     characters.  No more beeps and clear screens, guys.
  89.  
  90. Version 2.11  [10-19-92]
  91.  
  92.   o General Maintenence Release.
  93.  
  94. Version 2.10  [8-27-92]
  95.  
  96.   o Added the @SEX@ codes to the action commands.  They are used
  97.     to place a "his" or "her" into the action command text.
  98.   o Added the "Sex" field to the configuration menu.
  99.   o The door no longer will lock a user out for a day if the
  100.     user runs out of time.
  101.  
  102. Version 2.09  [8-7-92]
  103.  
  104.   o Added optional full file locking.  See documentation for
  105.     more details.
  106.   o Fixed the user-ID assigning code to use up to 16 characters.
  107.   o Now displays a warning when user has only five minutes left
  108.     in the door.
  109.   o Logging is now optional.
  110.   o Corrected my mis-spelling of Tom Tcimpidis's name in the
  111.     documentation.
  112.   o Fixed the screen pause when displaying MAINHELP.BBS and
  113.     CFGHELP.BBS.
  114.   o Added TUTORIAL.BBS and ALLALONE.BBS.  See documentation for
  115.     details.
  116.   o Added "Are you sure" prompt to configuration menu.
  117.   o Added more mis-setup checking.
  118.   o Changed the paging system a little bit to allow multiple pages
  119.     to a user on the BBS.
  120.  
  121. Version 2.08  [7-24-92]
  122.  
  123.   o Minor bug fixes.  Just a little bit of clean-up.
  124.  
  125. Version 2.07  [7-21-92]
  126.  
  127.   o Changed the error handling a little bit.
  128.   o Fixed a bizarre error with file sharing which so far has only
  129.     occured on one system.
  130.   o Disabled all the action command codes except @SUB@ and @SUB1@ in
  131.     the demo version.
  132.  
  133. Version 2.06  [7-16-92]
  134.  
  135.   o /ACTIONS can be used as /ACTION, or /A.
  136.   o The /ACTIONS listing lists action commands in four columns.
  137.   o The /ACTIONS listing will pause every 20 lines.
  138.   o Action Command text can be 80 characters, and the command
  139.     key-word can be 15 characters.
  140.   o More example action commands included!
  141.   o When configuring a user-ID, the user-ID is checked with the
  142.     language filter.
  143.   o The /TIME command now properly returns the correct amount of
  144.     time left.
  145.   o The /GIVETIME command was added.  Now users can give time to
  146.     another user, subtracting the amount given from their own
  147.     time limit.
  148. *** The Action Command parser has been nearly completely redone.
  149.     Sorry, but the @OBJECT@ codes no longer exist.  I had to
  150.     do this because the code I did before was too limited.
  151.  
  152. Version 2.05  [7-14-92]
  153.  
  154.   o Added a new line in WILDCHAT.CFG to specify if the status line
  155.     is on or off.  MONOCHROME SYSTEMS REQUIRE THE STATUS LINE OFF!
  156.  
  157. Version 2.04
  158.  
  159.   o Added the "NOERROR" command switch for my own uses in helping
  160.     you guys debug problems with WildChat.
  161.  
  162. Version 2.03
  163.  
  164.   o The "--->" prompt can be backspaced over.
  165.   o Nodes that are down aren't listed in the /USERS listing.
  166.  
  167. Version 2.02
  168.  
  169.   o @OBJECT@ code added to make more flexible action commands.
  170.   o Added more screen displays for help in debugging.
  171.  
  172.